學者及大學教授 / Academic / professor
大字係領域（由已登記職業／領域派生），唔係姓氏。
FANG Guoxin
領域：學者與科學家
據官方名冊嘅逐人紀錄：職銜：Assistant Professor；學位：Y. Meng, G. Fang*, J. Yang, Y. Guo, C.C.L. Wang*, “Spring-IMU fusion based proprioception for feedback control of soft manipulators”, IEEE/ASME Transactions on Mechatronics, Focused Section on Compliant Mechanisms for Mechatronics, September 2023. (*corresponding authors)。
According to the official record in cuhkFaculty: Title: Assistant Professor; Degrees: Y. Meng, G. Fang*, J. Yang, Y. Guo, C.C.L. Wang*, “Spring-IMU fusion based proprioception for feedback control of soft manipulators”, IEEE/ASME Transactions on Mechatronics, Focused Section on Compliant Mechanisms for Mechatronics, September 2023. (*corresponding authors).
呢句係由下面〈官方紀錄〉嘅欄位直接串成，冇加入任何推斷；完整欄位同原文連結見該節。
繁體中文
方國鑫現為香港中文大學機械與自動化工程學系助理教授。他二○一六年於北京理工大學取得機械工程學士學位，二○二二年在荷蘭台夫特理工大學（Delft University of Technology）取得設計工程博士學位。加入中大之前，他在英國曼徹斯特大學任博士後研究員，從事數碼製造（digital manufacturing）研究。他的訓練由機械工程延伸到設計工程，兩者分別關注「點樣造」同「點樣設計」，而數碼製造正好把設計同製造流程用電腦模型連起來。博士後階段嘅數碼製造研究，重點係用電腦模型貫穿設計同生產流程，令工藝參數可以先行模擬再落機。學系個人頁未列出他嘅具體研究課題同著作，本條目只按頁面所載嘅學歷、職務同研究範疇書寫；未列出嘅部分一律留白。他所屬嘅機械與自動化工程學系，教研涵蓋力學、控制、設計同製造；學系個人頁只列教員嘅學歷、職務同研究方向，冇完整履歷。上述資料嘅查核日期為二○二六年十月二十九日；如有更新，以學系頁面為準。
English
Guoxin Fang is an assistant professor in the Department of Mechanical and Automation Engineering at The Chinese University of Hong Kong. He took a bachelor's degree in mechanical engineering at the Beijing Institute of Technology in 2016 and a PhD in design engineering at Delft University of Technology in the Netherlands in 2022. Before joining CUHK he was a postdoctoral research associate in digital manufacturing at the University of Manchester in the United Kingdom. His training runs from mechanical engineering into design engineering — one concerned with how things are made, the other with how they are designed — and digital manufacturing connects the two through computer models of design and production. The departmental page does not list his specific research topics or publications, so this entry follows only the degrees, posts and research field recorded there; anything not listed is left blank.
下列欄位逐字抄自官方名冊／院校紀錄嘅逐人頁（抓取日期 2026-10-29）：https://www4.mae.cuhk.edu.hk/peoples/fangguoxin/。本站只列官方寫過嘅欄位，冇加任何推斷。
Assistant Professor
Y. Meng, G. Fang*, J. Yang, Y. Guo, C.C.L. Wang*, “Spring-IMU fusion based proprioception for feedback control of soft manipulators”, IEEE/ASME Transactions on Mechatronics, Focused Section on Compliant Mechanisms for Mechatronics, September 2023. (*corresponding authors)
Fields above are copied verbatim from the official record linked here; the site adds no interpretation.
Assistant Professor
資料整理日期 / Compiled: 2026-10-14
在北京理工大學取得機械工程學士學位。
Completed a bachelor's degree in mechanical engineering at the Beijing Institute of Technology.
在台夫特理工大學取得設計工程博士學位。
Completed a PhD in design engineering at Delft University of Technology.
繁體中文
方國鑫嘅研究屬數碼製造範疇，即用電腦模型貫穿設計同生產；他由機械工程轉向設計工程，再喺曼徹斯特從事博士後研究，路徑圍繞製造流程嘅數碼化。
English
Fang works in digital manufacturing, where computer models run through both design and production; his path from mechanical to design engineering and then to a Manchester postdoc centres on digitising manufacturing processes.
仲有 192 位同界別人物未列出；睇晒 學者及大學教授 全部名單 →
Chinese University of Hong Kong - Faculty Members · 香港中文大學 · 查閱日期 2026-10-14
CUHK Department of Mechanical and Automation Engineering - Faculty Profiles · 香港中文大學機械與自動化工程學系 · 查閱日期 2026-10-29
Auto Chat
只從已核對條目作答，不發明數字。
